- ✔ SPE ion membrane electrolysis technology produces high hydrogen content, and the water is clear and transparent when hydrogen is produced by small bubbles. Hydrogen-oxygen separation and chamber electrolysis technology to remove residual chlorine and ozone to the outside of the cup, hydrogen and oxygen separation high hydrogen content.
- ✔Hydrogen-rich water cup sub-cavity design: The residual chlorine generated by electrolysis is discharged out of the cup through the vent hole at the bottom. The bottom exhaust gas waste water, the residual chlorine ozone separation tank. The internal double tube design allows for both venting and draining.
- ✔Connect the mineral water bottle: First, unscrew the glass body. In the second step, screw the mineral water bottle connector onto the cup holder. In the third step, unscrew the cover on the joint, pick up the base with the interface of the mineral water bottle and screw it on the mineral water bottle. Invert the cup holder on the table and press the switch to electrolyze.
- ✔Product details: Non-slip cup cover, stainless steel inner sleeve, healthy and environmentally friendly material. High silicon borosilicate glass gathers heat and heat. Double-layer glass body, double-layer high temperature resistant high silicon boron glass body, heat insulation is not hot.
- ✔Do not need pick the water, you can use boiling water 0-95 ° C, you can use purified water mineral water tap water (boiled) bottled water filtered water purified water. Not limited to water quality, can be purified pure water, filtered water, direct drinking water, bottled water tap water (boiled) mineral water.
Capacity: 300ml
Weight: 536g
Size: φ7cm H23cm
Color: black, red, blue
Hydrogen production time: 5 minutes
Charging time: 4-5 hours
Uses: 15-20 cups
Power consumption: 10W
Hydrogen content: 1200-1500ppb
High borosilicate glass
Weak alkaline water
Titanium platinum electrolytic net
Ozone cleaning
Inner insulation and waterproof techno logy
USB charging
One-button rapid hydrogen production
Rapid generation of hydrogen- rich water
5 minutes hydrogen production: up to 1000PPB
Usage:
1. Press the button once and the blue light is always on, start working for 5 minutes, automatically shut down after the work is completed.
2. Press and hold for 2 seconds to shut down during work.
3. When the power is off, the blue light flashes. Please charge in time. If it is not charged in time. Will enter the shutdown state, please use after charging.
4. The green light is always on when charging.
5.When the battery is fully charged, the blue light is always on. Please use the charger after removing it to avoid affecting the battery life.
6. When charging, please charge for 20 minutes. For example, when the power is turned on, the “didi” sound indicates that the battery is low. Please use it fully.
Tips: For the first time, first pour 60 ℃ of warm water for 30 minutes.
If there is no water in the cup, please do not turn on the power.
Do not put metal chopsticks into the cup.
